Filter
Top Products
26
P E R F O R M A N C E S E R I E S O W N E R ’ S G U I D E
Clearing a User Program – this will clear both user programs
1. Turn power off.
2. Simultaneously depress the Start, + (plus) and – (minus)
keys.
3. Turn on treadmill power switch on side of treadmill at
right base. (Have someone help or use your foot to turn on
power switch.)
4. Hold the 3 keys Start, + (plus) and – (minus) for about ten
seconds, then release. The two user programs should have
been cleared.
How to Record and Run User Programs
CHAPTER THREE: USER PROGRAMS