Filter
Top Products
Symptom Probable Cause Corrective Action Recommended Tools
HANDLEBAR
BUTTONS DO
NOT FUNCTION
600R
“Cruise Control”
“Start” Button
“Shift” Button
“_“ Button
“Select” Button
“+” Button
• Remove console-mounting screws.
Locate 10P7B (Page 20).
• Check for continuity between pin 7 and
pin 1 at 10P7B. Press Cruise control
button.
(A)
• No continuity? Perform a continuity
check on the appropriate cable.
• Replace cable or if cable good – replace
handlebar assembly.
--------
• Check for continuity between pin 7 and
pin 2 at 10P7B. Press Start button. See
(A) above.
--------
• Check for continuity between pin 7 and
pin 3 at 10P7B. Press Shift button. See
(A) above.
--------
• Check for continuity between pin 7 and
pin 4 at 10P7B. Press _ button. See (A)
above.
--------
• Check for continuity between pin 7 and
pin 5 at 10P7B. Press Select button. See
(A) above.
--------
• Check for continuity between pin 7 and
pin 6 at 10P7B. Press + button. See (A)
above.
--------
• If all have continuity and problem
persists – replace Console
Multi-meter
Support Services 800-883-8783 Mon-Fri 8:30am-5:00pm Central Time Zone Fax: 636-272-7148
Page 11