Triax SR920W Watch User Manual


 
If at 12:00 the hands do not line up exactly as they
should, reset them to the 12 o’clock position in
CHRO mode.
This procedure must be followed after changing
the battery to ensure proper watch operation.
1. Pull the crown (C) out
2. Press A to select the hand to be adjusted in
the following order: Second hand
Minute hand
Hour hand
The hand to be adjusted will move clockwise
or counterclockwise and return to its original position
3. Press B to reset the selected hand to the 12 o’clock position
The second hand moves in one second increments while the minute and hour
hands move slightly
When resetting the hour hand to the 12 o’clock position check that the 24
hour hand indicates “24”
The hands move quickly if B is held for 2 seconds
4. Push the crown (C) back into normal position
Adjusting the Hand Position (Super)
ENG
15