Filter
Top Products
Mode
Set
Scroll
3. Hold Set•.
The current elevation appears, and the + or - (above or below sea level) is
flashing.
4. Cycle Scroll to your preferred value.
5. Push Set• to select.
The first digit flashes.
6. Repeat steps 4 and 5 until all digits have been set.
The computer returns to the Altitude CUR screen.
1. Cycle •Mode to Altitude.
2. Cycle Scroll to TTL.
3. Hold Set•.
The total elevation gain appears, and the first digit is flashing.
4. Cycle Scroll until the first digit shows your preferred value.
5. Push Set• to select.
The next digit flashes.
6. Repeat steps 4 and 5 until all digits have been set.
The computer returns to the Altitude TTL screen.
06 Incite ACH 07_13.indd 34 7/14/06 7:26:18 AM