Topcom 1000W Watch User Manual


 
8
TOPCOM Speedopulse 1000w
8.5 SETTING THE CLOCK
After the weight is confirmed, "24" should be flashing.
• Press the RIGHT button to select 12 or 24 Hour format.
• Press the LEFT button to confirm. The hour indication will flash.
• Press the RIGHT button to adjust the hour.
• Press the LEFT button to confirm. The minutes will flash.
• Press the RIGHT button to adjust the minutes.
• Press the LEFT button to confirm
8.6 MAINTENANCE WARNING INDICATOR DISTANCE
After setting the clock, the number "600" will flash. This is the default distance in KM
or MILES for the Maintenance Warning function.
This function is used to remind you to maintain the key components of your bike, e.g.
lubricating the chain.
• Press the RIGHT button to select 200, 400, 600 or 800
• Press the LEFT button to confirm.
Note: a "wrench" ( ) icon will flash on your screen whenever
your odometer passes any multiple of your designated distance.
Press the LEFT button to reset the flashing icon.
8.7 TEMPERATURE INDICATION SELECTION
After setting the maintenance warning distance:
• Press the Right button to choose between °C and °F.
• Press LEFT button to confirm and leave the setting menu.
9 DISPLAY & FUNCTIONS
9.1 START / STOP
Press any button to turn on the display and the wireless mounting system. The unit
will automatically stop when left unused for over 5 minutes.
9.2 TOP DISPLAY
1. SPEED COMPARATOR
A "+" or "-" sign will appear in the top right hand corner
of the screen to indicate whether your Current Speed is
higher or lower than your Average Speed.
1
23
4