Tissot 131_N/12/09 Watch User Manual


 
Analog Watches with alarm
*
www.tissot.ch
131_EN / 12/09
2/2
Setting the time
Crown in position III
To set the time forwards or backwards, simply turn the crown in the appropriate direction. The date changes
just after midnight is reached.
Notes :
The seconds hand is stopped whenever the crown is in position
II.
The crown must not be left in position III : this increases power consumption !
Congratulations
We would like to congratulate you on having chosen a watch from TISSOT
®
, one of the most highly renowned Swiss brands in the world. Meticulously designed,
using only the highest quality materials and components, your watch is protected against shock loads, variations in temperature, water and dust.
Unusually easy to set and use, your watch is fitted with a quartz movement with an hours-minutes-seconds-date display and a rare and refined alarm function.
To ensure that your watch operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter.This
user's manual is applicable to all analog quartz watches
TISSOT
®
fitted with an alarm.
Rapid correction of the date
Crown in position II
The date can be corrected rapidly by turning the crown backwards (counter-clockwise).
Setting the alarm time
Crown in position II
The alarm time is set by turning the crown forwards (clockwise).
Switching ON / OFF the alarm
Crown in position I
OFF
Neutral position: alarm off.
ON
Pulled out position: alarm on (confirmed by a beep).
Care and maintenance
We would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in
fresh water and leave it to dry completely.
Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields.
To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT
®
representative or
retailer.
TISSOT
®
Quartz watches benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years in continuous
use.
Replacing the battery
Once the battery has run flat, it must be replaced without delay by an approved TISSOT
®
representative or retailer.
Battery type: button-type zinc-silver oxide primary battery cell, Renata 396 / Service life : about 3 years.
Collection and treatment of end of life quartz watches*
This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following
this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources.
* valid in the EU member states and in any countries with corresponding legislation.