Filter
Top Products
3
W-215
www.timex.com
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function.Press MODE to go to
Chrono mode.
To start, press START/SPLIT.Chrono counts up by hundredths of a second up
to one hour,then by seconds up to 100 hours.Stopwatch icon w flashes to
indicate chrono is running.
To stop,press STOP/RESET.Stopwatch icon w freezes to indicate chrono is
stopped.
To resume,press START/SPLIT, or to reset (clear) chrono, press and hold
STOP/RESET.
When chrono is already running, chrono continues to run if you exit mode.
Stopwatch icon w appears in TIME mode.
While chrono is running, press START/SPLIT to take a split.Lap and split times
will be displayed with lap number.
To set display format, press SET.Then,press +or – to select desired format.
Press DONE to exit.
NOTE:When a split is taken,times are frozen on the display for 10 seconds.
Press MODE to release display and show running chrono immediately.
TIMER
Timer mode provides a countdown timer with alert. Press MODErepeatedly
until TIMER appears.
To set countdown time:
1) Press SET. Hours flash.Press + or – to change hours;hold button to scan
values.
2) Press NEXT. Minutes flash.Press + or – to change minutes.
3) Press NEXT. Seconds flash.Press + or – to change seconds.
4) Press NEXT.Action at end of countdown flashes. Press + or – to select STOP
or REPEAT,indicated by hourglass icon with arrow I.
5) Press DONE at any step when done setting.
To start timer,press START/SPLIT.Timer counts down every second from
countdown time.Hourglass icon H flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Hourglass icon H freezes to indicate
timer is stopped.
To resume countdown, press START/SPLIT,or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to silence.If REPEAT AT END selected,timer repeats
countdown indefinitely.
Timer continues to run if you exit mode.Hourglass icon H appears in Time mode.
HYDRATION
Hydration mode provides a countdown timer with alert to remind you to drink
during a workout. Press MODErepeatedly until HYDRA appears.
To set hydration time:
1) Press SET. Minutes flash.Press + or - to change minutes; hold button to
scan values.
2) Press NEXT. Seconds flash.Press + or - to change seconds; hold button to
scan values.
3) Press DONE at any step,when done setting.
To start hydration timer,press START/SPLIT.Timer counts down every second
from countdown time.Drop icon D flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Drop icon D freezes to indicate timer
is stopped.
To resume countdown, press START/SPLIT,or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to stop alert.
Hydration timer continues to run,if you exit mode.Drop icon D appears in
Time mode.
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11