Filter
Top Products
23
E
4. Press SET (DONE) to exit or press MODE (NEXT) to set up the Target
Time feature (described later in this section).
Note:
Selecting TOTAL RUN format allows you to view total elapsed time since
you started the CHRONO, including any time elapsed while the Chrono
was stopped. When a lap/split is taken the watch automatically switches
to LAP/SPLIT format.
Target Time Pacer
Because pace is important to achieve your goals, a built-in audible track-
er indicates whether your target lap times are achieved. Rise above or fall
below your predetermined target times, and varying chimes and mes-
sages will provide feedback. Slow beeps indicate you’re behind pace
(SLOW), a single beep lets you know you’re on pace (ON-PACE) and rapid
beeps tell you are ahead (FAST). The screen will also display your per-
formance data.
• When the Chrono is running, (icon of stopwatch) appears in the Time
Display.
• You can take up to 199 laps, however the chronograph will only record
the most recent 150 laps. Please consider that each succeeding work-
out will require three laps of storage that will be used to stamp the
time/date, target time, and delta times for that workout.
Changing the Chronograph Display Format
This determines what is shown in middle and bottom lines of the display.
The middle line has the larger font. You have the option for LAP/SPLIT,
SPLIT/LAP and TOTAL RUN.
1. Press Mode until CHRONO appears.
2. Press SET to start setting.
3. Press START/SPLIT (+) or STOP/RESET (-) to select LAP/SPLIT (Lap in
large digits), SPLIT/LAP (Split in large digits), or TOTAL RUN.
22
W254_TAP_Booklet_EN_Layout 1 9/18/09 1:59 PM Page 22