Filter
Top Products
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION
11
STEP4
Mount the Personal Viewing Screen on the
Treadmill. Using the 5mm Hex Allen Key, screw in
the (2) M8 Button heads at the base of the PVS.
STEP5
Adjust the display cap up or down to align with the
holes on the display front. Once the cap is aligned,
tighten the button head screws with the 5mm Hex
Allen Key.
STEP6
Replace the top back plastic. Use a #2 Phillips
screwdriver insert the (8) screws, retained from
earlier step, into the plastic. Do Not tighten at this
time.
Check the cap with the neck and grommet. Make
sure the cap is flush with the top back plastic.
Adjust if necessary. Use the screwdriver to tight-
en the screws snug from the previous step.
Caution: Do Not over tighten screws.