Filter
Top Products
PAL / SECAM Personal Viewing Screen Set up
Before you can set up the Personal Viewing Screen you must first get into the “Maintenance Mode” of
the Star Trac Cardio Equipment, while is this mode you will tell the equipment what type of Personal
Viewing Screen you are installing.
For the “Maintenance Mode” on the E-TR follow the steps below;
1. Press and hold the , , and keys together on the display keypad of the Cardio
Equipment.
2. A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information
Window.
3. Release the keys. “MCI VX.XX CKSM XXXX” will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
Incline Keys: Displays the next and previous parameter, respectively. Keys will repeat if
held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in
increments of 1 unit or 0.01 unit, as appropriate for the parameter. These keys do not
save the new value - see Key below.
Enter Key: Updates (saves) the value of the displayed parameter in Flash memory.
Alternatively, the key may be used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Maintenance Settings Mode and restarts the treadmill greeting.
4. Press the (incline up) to navigate to the “PVS” variable.
5. Press the (speed up) to change the variable from ATSC/NTSC to PAL/SECAM.
6. Press the to accept the change.
30 STAR TRAC P
ERSONAL
V
IEWING
S
CREEN
O
WNER
’
S
G
UIDE