Filter
Top Products
16
15
16
15
1
7
8
16
16
15
15
ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
REAR
FRONT
Flanage Plates
face out.
STEP 1
Refer to the illustration below. Position the REAR STABILIZER(8) with the flange plates facing out,
then attach it to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC
WASHERS(M10)(16).
STEP 2
Attach the FRONT STABILIZER(7) with the flange plates facing out to the MAIN FRAME(1) with
BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC WASHERS(M10)(16).