Filter
Top Products
11
FORWARD
POSITION
PIN
SLOT
Support
Bracket
OPERATIONAL INSTRUCTION
HEADREST ADJUSTMENT
The HEADREST(32) on the CARRIAGE(25) can be positioned
flat or at an incline by simply pivoting the support bracket
underneath the HEADREST(32).
FOOTBAR ADJUSTMENT
The FOOTBAR(17) can be positioned at three angles. Lift the
FOOTBAR(17) until the pins come out of the slots on the FRONT
BRACE(1). Move the FOOTBAR(17) to the desired position and
lock the FOOTBAR(17) in position by pushing it down so that the
pins are in the slots on the FRONT BRACE(1).
NOTE:
PULLEY ADJUSTMENT
There are three adjustment holes on each side of the PULLEY
POST(36) for attaching the PULLEY SETS(38) in different widths.
Remove the ADJUSTMENT KNOBS(40) and ARC WASHERS
(M8)(70) from the PULLEY POST(36). Attach the PULLEY
SETS(38) to the position you want and secure with the
ADJUSTMENT KNOBS(40) and ARC WASHERS(M8)(70).
NOTE:
Always make sure the pins are locked into the slots properly.
Use forward position of the FOOTBAR(17) when standing on
the AeroPilates
Pro XP556 with one foot on the FRONT
WOODEN PLATFORM(3).
1.
2.
Always use the same adjustment holes for both sides.