Filter
Top Products
1 Front Stand 1
2 Middle Stand 1
3 Rear Stand 1
4 Connection Bar 4
5 Endcap 6
6 Pull Pin 8
7 Manual 1
PARTS LIST
DIAGRAM# PART NAME QTY
ASSEMBLY INSTRUCTIONS
Connect the FRONT STAND(1) to the MIDDLE STAND(2) with two CONNECTION BARS(4) and lock in
the place with the
PULL PINS(6). Repeat to connect the REAR STAND(3) to the MIDDLE STAND(2).
FRONT STAND(1)
(Wide)
REAR STAND(3)
(Narrow)
The PILATES RISER is designed to elevate the machine, Model No. 55-4280.
Place your PILATES machine onto the riser as shown in the illustration.
NOTE:
3
The feet of the Pilates machines must fit into the
FRONT STAND(1) and the REAR STAND(3).
The FRONT STAND(1) is wider than the REAR STAND(3). The Foot Rest end of your Pilates
machine will fit into the top of the
FRONT STAND(1) and the Headrest end of your Pilates machine
will fit into the
REAR STAND(3).