Filter
Top Products
7
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Unfold the BASE ASSEMBLY to an upright position by moving the FRONT FRAME(1) away from the
REAR FRAME(2). Then push down on the middle of the two FOLDING LINKAGES(3) until they are fully
locked down.
STEP 2
Slide one PROTECTIVE COVER(21) onto each side of the BASE ASSEMBLY, and pull the covers down
until the bottom of the covers are slightly lower than the FOLDING LINKAGES(3). Secure the PROTECTIVE
COVERS(21) to the FOLDING LINKAGES(3) with the SECURING STRAPS on the bottom of the covers.
NOTE: When the PROTECTIVE COVERS(21) are assembled correctly, the FOLDING LINKAGES(3)
should not be visible. Refer to the illustration.