Stamina Products 45-1003 Treadmill User Manual


 
USING THE ELECTRONIC METER
Walking Belt movement or push the button.
Automatic shut off after 4 minutes of inactivity.
POWER OFF :
POWER ON :
AA Batteries
MODE / CLEAR BUTTON:
Press and release to select functions.
Press and hold for three seconds to reset all
functions to zero.
SCAN:
TIME:
SPEED:
DISTANCE:
CALORIES:
Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change
every four seconds. Press and release the button until "
" appears on the display and points
to SCAN.
Displays the time from 1 sec. up to 99:59 minutes.
Displays the current speed from zero to 999.9 Mile/Hr.
Displays the distance from zero to 99.99 miles.
Displays the calorie consumption, from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
HOW TO INSTALL AND REPLACE BATTERY:
Open the Battery Door on the back of the meter.
The meter operates with two AA batteries, two batteries included.
Refer to the illustration to install or replace the batteries.
1.
2.
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended.
1.
2.
3.
NOTE:
FUNCTIONS:
10