Stamina Products 35-1625DW Fitness Equipment User Manual


 
5
ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE INMOTION
TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE
RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICH
CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
Keep children away from the INMOTION trampoline during assembly.
Keep fingers away from the ends of the rails in the hinge area when unfolding the
INMOTION trampoline. The INMOTION trampoline will snap into the unfolded position.
Serious injury can occur if fingers are caught between the ends of the RAILS.
The SAFETY PAD(6) must be installed before using the INMOTION trampoline.
STEP 1:
1.
Lay the trampoline on the floor and open the rails. The trampoline will look as shown in
illustration 1.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
WARNING :
1.
2.
3.
4.
BEFORE assembly, verify that the SECURE
PINS(10) are properly inserted in the Frame Rail.
The two protrusions must be assembled inside the
Frame Rail as shown in the SECTION VIEW of
the illustration. Otherwise, it could damage the
SECURE PINS(10) during Assembly Step 3.
NOTE :
Frame Rail
Secure Pin
Secure Pin
SECTION VIEW