Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the FRONT STABILIZER(2), the short one with the WHEELS(52), to the front of the FRONT FRAME(1)
with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and
ACORN NUTS(M8x1.25)(75).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
our toll-free number for assistance 1-800-375-7520 or e-mail us at customerservice@staminaproducts.com.
STEP 2
Attach the REAR STABILIZER(4), the one with the LEVELING CAPS(53), to the REAR FRAME(3) with
CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and
ACORN NUTS(M8x1.25)(75).
STEP 3
Screw the STAND(54) all the way up into the bottom of the FRONT FRAME(1). Connect the REAR
EXTENSION WIRE(38) to the FRONT EXTENSION WIRE(37). Insert the REAR FRAME(3) into the FRONT
FRAME(1) and secure with BUTTON HEAD BOLTS(M10x1.5x15mm)(59), ARC WASHERS(M10)(78),
WASHERS(M10)(83), and LOCK WASHERS(M10)(81).
NOTE: See page 11 for detailed leveling instructions to prevent rocking.