Filter
Top Products
10
USING THE ELECTRONIC METER
CALORIE:
TIME:
DISTANCE:
POWER OFF:
Automatically scans SPEED, DISTANCE, TIME, and CALORIE in sequence with a change
every five seconds. Press and release the MODE button until the arrow on the display
points to "SCAN".
Automatic shut off after three minutes of inactivity.
POWER ON:
FUNCTIONS:
Displays the time from one second up to 99:59 minutes.
SPEED:
SCAN:
FUNCTION BUTTONS :
MODE : Press and release to select the function to display on
the screen.
Press the button and hold it down for two seconds to
reset all functions to zero.
RESET :
Displays the current speed from zero to 999.9 miles per hour.
Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
Displays distance from the time the meter is turned on to 999.9 miles.
OPERATIONAL INSTRUCTIONS
Pedal movement or press any button.
Open the Battery Door on the back of the meter.
The meter operates with two AA batteries, included. Refer to the
illustration to install or replace the batteries.
1.
2.
HOW TO INSTALL AND REPLACE BATTERIES:
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended.
1.
2.
3.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the RESET button to reset the functions to zero.
NOTE:
AA Batteries