Filter
Top Products
USING THE METER
Open the Battery Door on the back of the meter.
The meter operates with two AA batteries, two batteries included.
Refer to the illustration to install or replace the batteries.
1.
2.
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended.
1.
2.
3.
NOTE:
CALORIES:
13
HOW TO INSTALL AND REPLACE BATTERIES:
TIME:
Automatically scans each function of TIME, SPEED, DISTANCE, and CALORIES in
sequence with change every four seconds. Press and release the button until "SCAN"
appears on the display.
Displays the time from one second up to 99:59 minutes.
Displays the current speed from zero to 999.9 miles per hour.
Displays the distance from zero to 99.99 miles.
Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
SPEED:
FUNCTIONS:
SCAN:
DISTANCE:
Pedal movement or push the button.
Automatic shut off after four minutes of
inactivity.
POWER OFF :
POWER ON :
MODE/RESET BUTTON:
Press to select display functions, include SCAN, TIME,
SPEED, DISTANCE, and CALORIES.
Press and hold for three seconds to reset all functions to
zero.
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the button and hold it down for three seconds to reset all functions to zero.
NOTE:
OPERATIONAL INSTRUCTIONS
AA Batteries