XT200 / XT600 / XT800
16
Auto-Pilot feature
This unique feature allows the user to instantly enter the Heart Rate Control mode at any
time with the press of a button.
The HR2 program button also doubles as the Auto-Pilot button.
During any program the user may press the Auto-Pilot button to enter the HRC program.
Your current heart rate (the heart rate you are at when you press Auto-Pilot) will be
maintained automatically by the Auto-Pilot program. You may press the elevation/incline up
or down buttons to change your target heart rate while in the Auto-Pilot mode.
Speakers:
The console has a built-in Speakers. You may Plug an Audio Source (CD player, MP3,
Computer ,etc.) into the Jack on the Left side of console.
There is no volume control on console, volume must be controlled by Audio Source.
To Turn Treadmill Off
(Blank out Display)
:
Two methods accomplish this: Use either one.
(1) Display will automatically turn off (blank out) after 30 minutes (no key operations) in
Pause / Stop mode.
(2) Remove tether cord.
The XT Series offers 7, factory preset programs, 2 user defined programs and one
Manual program.
Each preset program has a maximum speed level that is displayed when a desired
workout is chosen. The maximum speed that the particular program will achieve will be
displayed in the Speed window.
Also included are two user programs (User 1 and User 2) for custom workouts.
To Select a Program:
STEP 1: Press the desired PROGRAM key. Press enter to select the program. The
display will prompt you through the programming or you can just press Start to begin the
program with default values.
STEP 2: If enter was pressed, the Time window will blink with the default value of 20
minutes. You may use any of the up/down keys to adjust the time. After adjusting, or to
accept the default, press enter. (Note: You may press start at any time during the
programming to start the program.)
Programmable Features