Filter
Top Products
XT175 / XT275
15
XT275 Console
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the safety key is
installed, as the treadmill will not operate without it.
When the power is turned on, a message will scroll across the dot matrix showing the current
software version. Then the Time and Distance windows will display Odometer readings for a
short time, Time window will show how many hours the treadmill has been in use and the
Distance window will show how many miles (or Kilometers if the treadmill is set to metric
readings) the treadmill has gone. The treadmill will then enter idle mode, which is the starting
point for operation.
Quick-Start Operation:
STEP 1: Attach the Safety key to enable the display (if not already on).
STEP 2: Press the Start key to begin belt movement. Then adjust to the desired speed using
the Fast / Slow keys (console or handgrip). You may also use the rapid speed keys 2 through
10 to adjust the speed.
STEP 3: To slow tread-belt press and hold the Slow key (console or handgrip) to the desired
speed. You may also press the rapid speed adjust keys, 2 through 10.
STEP 4: To stop the tread-belt press Stop key or pull away Safety key.