Filter
Top Products
XE Series Elliptical
12
Manual
Using the Up/Down keys, highlight the Manual icon at the top of the display and press Enter key.
The profile will be blinking and you may use the Up/Down keys to adjust the program work level
and then press Enter. The Time window will now be blinking. Use the Up/Down keys to adjust the
program Time and then press Enter. The Distance window will now be blinking and you can adjust
a target Distance using the Up/Down keys then press Enter. Calories will now be blinking, repeat
the same process as above to set, then press Enter. The Watt icon will be blinking. If you choose
to set the Watts then the machine will automatically adjust the workload to maintain continuous
work. What this means is that if you set the Watt to 100 the machine will try to keep you working at
a rate of work that equals 100 Watts (or working at a rate that will keep a 100 Watt light bulb
burning). Watts are determined by the amount of work you are doing. On the Elliptical this means
the speed you are pedaling at combined with the workload of the machine. In Watt mode, if you
change your speed the machine will automatically change the workload to maintain the same Watt
level. If you pedal faster the workload will decrease and if you pedal slower the workload
increases.
After adjusting all the parameters, press Start to begin your workout.
Preset Programs
There are 12 preset programs to choose from. After power up, or reset, press the Up/Down keys to
highlight the Program icon. Press the Enter key to enter the program mode. The display will show
P1, for two seconds, then change to the P1 program profile. You may keep pressing the Up/Down
keys to scroll through the 12 programs. When you see a program you want, press the Enter key to
enter. At this point you may press start to begin the program with the default settings or you may
customize the program.
To customize the work level, press the Up key. You will see the profile increase in size. When the
work level is where you like it press the Enter key (If you do not want to customize the profile, just
press the Enter key to bypass).
The Time window will now be blinking. Use the Up and Down keys to adjust the workout time and
then press Enter.
The Distance window will now be blinking. Repeat the same process to set the distance to count
down, if desired, and press Enter.
The Calorie window will now be blinking. Repeat the same process then press Enter.
The Pulse window will now be blinking. Entering a Pulse number will set an alarm that will beep
when your heart rate reaches the programmed number to let you know you have reached your
target.
Once you have set the data you may press Start to begin the program. You may also press Start at
any time during the programming to begin. Any data that is not programmed at that point will count
up from zero.
When the program ends there is a series of audible beeps. You may press Start to restart the
program or press Reset to return to the start-up screen.