ET6 / ET8 / ET10
12
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power
cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the
desired position.
To Fold The Treadmill:
Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is
secured by the locking telescoping tube assembly in the center of the rear of the running deck.
To Unfold The Treadmill:
Apply slight forward pressure* on the treadmill running deck with one hand. Pull down on the
unlocking lever and slowly lower the running deck to the floor. The deck will lower unassisted when
it reaches about waist high.
*At the rear roller area to relieve pressure on the locking system.
ET6 / ET8
The treadmill is equipped with four transport wheels that are engaged when the treadmill is
folded. After folding simply roll the treadmill away.
ET10
Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the
treadmill away.
ET6 / ET8 Folding Instructions
Transport