Filter
Top Products
15
Derailleur Guard Installation (Solid Axle option):
1. Install rear derailleur on derailleur hanger.
2. Place rear wheel in frame and install non-drive side nut.
3. Insert appropriate derailleur guard pin in derailleur.
4. Place guard sleeve in derailleur guard.
5. Slide derailleur guard and sleeve over guard pin and axle.
6. Install drive side nut and tighten hub to manufacturer specifications.
7. Torque guard pinch bolt to 80 in-lbf (9 N-m).
Short (10mm):
(All Shimano derailleurs without
countersunk hanger bolt)
Medium (25mm):
Shimano XTR / XT / LX
(All Shimano derailleurs with
countersunk hanger bolt)
Long (31mm):
All SRAM derailleurs
GUARD PINS
31
25
10
DERAILLEUR GUARD INSTALLATION