Filter
Top Products
01/07 ID# M316001
11
FLAT OR ANGLED ROOF (continued)
4.
Drill holes in roof.
Position angled
brackets and secure
to roof.
B.
4.
C.
23
Keep assembly upright and position
struts (23) on desired location on roof
approx. 26”-30” (66-76 cm) apart.
Level in all directions. Mark and drill
holes. Secure struts in place.
All mounting points should
be sealed to prevent leaks
and water damage"
WARNING!
Note position of angle brackets (26 & 27)
in relation to pole bracket per style roof.
To achieve 106-3/4” (2.7 m) you may
have to make some adjustments
such as moving angled brackets
backward or adding height to the
entire assembly with wood between
angled brackets and roof.
NOTE:
Minimum distance
should be 106-3/4” (2.71
m) from top elevator
hole to playing surface.
Homeowner must
assume all
responsiblilty for any
personal or property
damage if backboard
height is lower than
recommended.
WARNING!
USE CAUTION; ASSEMBLY IS HEAVY.
TWO
CAPABLE ADULTS REQUIRED FOR THIS
PROCEDURE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY DAMAGE.
WARNING!
106-3/4”
(2.71 m)
27 & 26
23
Not Included
with Hardware