Filter
Top Products
14
ID# 211230 04/06
23
5
9
1
10.
11.
Attach struts (23) to board assembly using bolts
(29) and washers (17) as shown. Attach struts to
pole using bolt (10), washers (17) and nut (5).
Place assembled unit in desired location. Fill tank (1) completely with water (14 gallons/53
liters) or sand (approx. 170 lb./77 kg) and install tank cap (9).
ADD ONE GALLON (3.78
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!
13
29
23
IF USING SAND:
1 GALLON OF
ANTI-FREEZE IS
NOT
REQUIRED
NOTE:
SAND
SAND
(170 lb.)
(170 lb.)
(77 kg)
(77 kg)
29
10
17
17
WARNING!
DO NOT LEAVE ASSEMBLY
UNATTENDED WHEN EMPTY;
IT MAY TIP OVER.