Filter
Top Products
18
ID# M88724C1 08/06
17.
After pole has been secured to anchor plate (2) loosen nut (26),
remove cotter pin (9), and pull out pin (8). This will allow the
removal of the threaded assembly rod (14) which is no longer
necessary for the remainder of the assembly and installation of
system.
27
9
8
24
26
14
25
ONLY AFTER THE ANCHOR
PLATE HAS BEEN FULLY
TIGHTENED: Remove cotter
pin (9) and pin (8) to remove
threaded assembly rod
(14)
from anchor plate (2).
WARNING!