Filter
Top Products
32
ID# M881111 12/05
4.
16
B.
A.
C.
3.
A. While holding handle, remove pin (16).
B. Move elevator up or down to desired
height.
C. Replace pin (16) full length to lock
system at desired height.
Apply height adjustment label (35) to front of
pole as shown.
Regulation rim height is 10 feet (3.05 m).
10 ft.
(3.05 m)
Peel protective
film from surface
of acrylic
backboard prior
to use.
NOTE:
EXACTAHEIGHT : ADJUSTMENT
INGROUND
201251
Eng: Dan\Tom
1st Used:
2/99
Size = 4" x 3"
Corner Radius = 3/8"
Die Cut Label
3.25 Mil Vinyl
All Temp. Permanent Adhesive
1 Mil. Polypropolyne Overlaminate
Illustrator 8.0 = EPS
B
acking + 1/16 Circumference
Rolls of 500
2
2
1
3
201251 2/99
HEIGHT ADJUSTMENT
T
O ADJUST BACKBOARD:
1. While holding handle, remove pin.
2. Move elevator up or down to
d
esired height.
3
. Replace pin full length to lock
system at desired height.
35
DO NOT ALLOW CHILDREN
TO ADJUST HEIGHT.
WARNING!