Filter
Top Products
15
08/06 ID# M867SF12
15.
After pole has been secured to plate (2) loosen nut (18),
remove cotter pin (8), and pull out pin (13). This will allow the
removal of the assembly bolt (14) which is no longer
necessary for the remainder of the assembly and installation
of system.
9
8
13
24
18
14
25
24
25
WARNING: ONLY AFTER
NUTS (25) HAVE BEEN
FULLY TIGHTENED:
Remove cotter pin (8) and
pin (13) to remove assembly
bolt (14) from bottom
plate (2).
WARNING!