Filter
Top Products
20
SX4 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
COMPUTER INSTRUCTIONS
Buttons Function
START button
Press the button to start the computer or start the program.
The initial speed of 0.8 km/h / 0.5 mph
STOP / ENTER button
Press to confirm a program and preset function values under setting mode.
Press to quit preset program and function values after completing a single program.
Setting procedure: returns to beginning of setting mode before pressing the START key.
Press to stop exercise during workout time.
SPEED Up button
Press the button to increase the speed or set the program.
SPEED Down button
Press the button to decrease the speed or set the program.
POWER ON
After connecting the power cord switch the power button on. The LCD screen will light up.
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the
safety key and attach the clip to your clothing at your waist before beginning your workout.
If you should encounter problems and need to stop the motor quickly, simply pull on the cord to disengage the
safety key from the console. To continue set the speed controller to stop and then reinsert the safety key into the
console, then press start.
SLEEP MODE
When the power is ON the computer will automatically enter POWER OFF MODE if it is left idle for 5 minutes,
press any button to return to the power on status when the computer is in the POWER OFF MODE.
COMPUTER OPERATION
Power on – “P1” (manual) will flash in the LCD display. Press SPEED UP / DOWN keys for desired program.
Please refer to the following instructions for different program options.