Filter
Top Products
Step 12 - Install Handlebar Post
Connect the Upper Computer Wire ( 90 ) to the Lower Computer Wire ( 91 ) and
the Upper Hand Pulse Wire ( 92 ) to the Middle Hand Pulse Wire ( 91 ).
Attach Handlebar Post ( 2 ) to the Main Frame (1) using:
4 – M8 Washer ( 157 )
4 – M8 Spring Washers ( 118 )
4 – M8 x 15MM Round Allen Head Bolt ( 120 )
Note: Be careful not to damage or pinch wires when Handlebar Post is installed.
Step 13 - Install Handlebar Post Cover
Attach the Handlebar Post Cover Left (32) and Right (33) to the Handlebar
Post ( 2 ) using :
2 – M5 Round Philips Head Machine Screw ( 129 )
Step 14 - Install Handlebars
Attach the Left Handlebar ( 4 ) and Right Handlebar ( 5 ) to Upright Tube ( 2) using:
4 – M8 Washer ( 157 )
4 – M8 Spring Washers ( 118 )
4 – M8 x 15MM Round Allen Head Bolt ( 120 )
Step 15 - Install Computer
Connect the Upper Computer Wire ( 90 ), the Upper Hand Pulse wire (92) to the
2 wires that are on the back of the Computer (40)
Attach the Computer (16) to the Upright Tube ( 2 ) using:
4 – M5 x 10MM Screws (125) ( On back of Computer)
Note: Be careful not to damage or disconnect the wires when attaching the computer.
7