Filter
Top Products
24 9.45TV TREADMILL
ASSEMBLY
STEP 6: Assemble the Side Handlebars
NOTE: Side rails are interchangeable for use on both right and left
sides. Make sure all wires recessed into the frame. DO NOT
trap or pinch.
(A) Connect the Left Motion Control lower wire to the middle wire (207 to 309 ).
805
X2
As Shown in the diagram below.
(B) Insert the Left Handlebar (201) into the Upright Tube (301). Using one
M8 x 15mm bolts (804) to secure the upper portion. Use two M8 x 50mm
Bolts (805) to secure the lower portion to the base frame. Use two M8 x50mm
Bolts (805) to secure the middle portion to the base frame.
(C) Repeat the above process for the Right side.
207
309