Filter
Top Products
22 7.6HR PRO TREADMILL
ASSEMBLY
STEP 5: Assemble the Front Handlebar
NOTE: PLEASE MAKE SURE NOT TO PINCH THE HAND PULSE SENSOR
WIRE WHEN ATTACHING THE HANDLEBAR ASSEMBLY.
(A) Connect the Hand Pulse Sensor Wires (215 and 605), as shown in FIG3.
(B) Attach the Handlebar Assembly to the Right and Left Uprights
(205 and 206) and secure with four M8 x 45mm Flat Head Bolts (802).
(C) Fully tighten the M8 x 80 x 25mm Allen Head Bolt (811).
802 X4
605
215
FIG3
206
205
802
802
203
104
215
215
605
605
811