Filter
Top Products
www.smoothfitness.com
27
STABILIZER ADJUSTMENT
How to level the treadmill:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as
the incline adjustment to function incorrectly. Please follow the procedure described below to
make sure the treadmill stabilizer is adjusted correctly prior to use. You may need the assistance
of another person to perform this adjustment.
1. There are four stabilizers and two cushions
located on the underside of the treadmill as shown
in drawing 1. These all need to sit firmly on the
floor to prevent the treadmill from wobbling during
use.
1. Four stabilizers towards the rear and two cushions at
the front.
2. Inspect each side of the treadmill base frame.
The treadmill should sit on the floor with all four
stabilizers and both cushions resting firmly on the
floor as shown in drawing 2. Shake the
handlebars back and forth to check if they are
resting firmly on the floor. If they are not, tilt the
treadmill to one side to adjust the stabilizers as
shown in drawing 3. Simply turn the stabilizers like
a screw to adjust their heights. Repeat this until
the treadmill sits firmly on the floor.
2. Check position of stabilizers and cushions.
3. Tilt treadmill to access stabilizers.