Filter
Top Products
SMOOTH 6.25 MOTORIZED TREADMILL
Visit us at: www.smoothfitness.com
10
ASSEMBLY
STEP 1:
Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG 1.
Rotate the Left and Right Uprights (13 and 14) up into position. Connect the Upper Section Computer Wire (7) to the
Lower Section 7 Pin Control Wire (24) and the Upper Section Safety Key Wire (78) to the Lower Section Safety Key
Wire (52). Insert any extra cable length into the Left Upright (13).
Insert the Left and Right Uprights (13 and 14) into the Base Frame (36) and secure by tightening the two Bolts (105)
as shown in FIG 2. The two Bolts (105) are preassembled to the Base Frame (36) at the factory.
FIG. 1
FIG. 2
14
36
13
105
E
14
36
105