Filter
Top Products
www.smoothfitness.com 36
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up
Check the following:
Make sure the power cord is plugged into a surge
protector, the surge protector is plugged into a properly
grounded outlet and the surge protector is turned on
(refer to the Power Requirements section in this manual).
Equipment circuit breaker is in the reset position
Equipment power switch is in the on position
Safety key is properly inserted into the computer console
Wall outlet is properly functioning with correct voltage
(Have an electrician check for inadequate voltage at the
outlet refer to the Power Requirements section in this
manual)
House circuit breaker is reset and is the proper size.
(refer to the Power Requirements section in this manual)
Treadmill stops operation during use
Safety key is properly inserted into the computer console
Equipment circuit breaker is in the reset position
House circuit breaker is reset, meets proper
requirements and if worn replaced by an electrician.
(refer to the Power Requirements section in this manual)
Program time has expired
Treadmill will not incline(Power fold models only) Check for proper positioning of spring knob for folding(See
procedure in owners manual)
Treadmill will not unfold
Power Fold only
Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Manual Fold only
Folding locking lever is depressed
Treadmill running belt moves slower than speed displayed on
computer
Metric/English conversion (See owners manual for
Metric/English conversion process)
Treadmill running belt moves slower than speed displayed on
computer
Metric/English conversion (See owners manual for
Metric/English conversion process)
Running belt is not centered
Treadmill is properly leveled(See procedure in owners
manual)
Center running belt (See Centering procedure in owners
manual)
Running belt is slipping or hesitating while in use
Tension running belt (See process in owners manual)
Treadmill running belt moves slower than speed displayed on
computer
Metric/English conversion (See owners manual for
Metric/English conversion process)
Running belt is not centered
Treadmill is properly leveled(See procedure in owners
manual)
Center running belt (See Centering procedure in owners
manual)
Running belt is slipping or hesitating while in use
Tension running belt (See process in owners manual)