Filter
Top Products
6 VIAspire Oxygen Portable Manual 300P-LT07 REV 0 300P-LT07 REV 0 VIAspire Oxygen Portable Manual 7
VIAspire Portable Overview
The illustration shows the parts of the VIAspire Portable.
Indications for Use
The Model 300P and/or 600P Liquid Oxygen Portable will
provide a source of supplemental oxygen for ambulatory
home healthcare patients, by vaporizing medical grade liquid
oxygen and then dispensing it to the patient via an integral
electronic conserving device. The Model 300P and/or 600P
Liquid Oxygen Portable is neither a life-sustaining nor a
life-supporting device.
Provider Checklist
Before leaving the VIAspire Liquid Oxygen Portable with a
patient, the following checklist MUST be completed:
Check all parts for shipping damage. In case of damage,
do not use. Contact Inspired Technologies, Inc. for further
instructions.
Make sure the VIAspire Liquid Oxygen Portable is com-
patible with the liquid oxygen source. Use a liquid oxygen
reservoir with a compatible coupler.
Instruct the patient on the safe operation of the VIAspire
Liquid Oxygen Portable and all associated accessories, and
review ALL warnings.
Leave a copy of this instruction guide with the patient.
£
£
£
£
Filling a VIAspire Portable 300 or 600
After the VIAspire Liquefi er has liquefi ed enough oxygen,
you can fi ll your portable by following these instructions.
WARNING
If the Liquid Oxygen Coupler Access Door on top of
the VIAspire Liquefi er is opened and the unit
continues to run, do not fi ll the portable. Contact
your medical equipment provider to service the
equipment.
CAUTION
The VIAspire Portable is designed to accept 93%
pure liquid oxygen from the VIAspire Liquefi er.
Most oxygen portables are not compatible.
Attempting to use an incompatible portable device
may damage the VIAspire Portable or Liquefi er,
or could lead to injury.
0
LED Battery
Indicator
Fill Valve
LOX Fill Coupler
Flow Rate
Selector Knob
Contents Indicator
Batteries (4 AA cells)
ALKALINE ONLY
Continuous Flow/
SmartDose Switch
Oxygen Outlet
Connector