English
14
SPECIFICATIONS
1 Frequency of crystal oscillator .......................... 32,768 Hz (Hz = Hertz … Cycles per second)
2 Loss/gain (monthly rate).................................... Less than 15 seconds at normal temperature range
(5° C ~ 35° C) (41° F ~ 95° F)
3 Operational temperature range ......................... –10° C ~ +60° C (14° F ~ 140° F)
4 Driving system .................................................. Step motor, 2 pieces
5 Display system
Time............................................................... Hour, minute and second hands
Date ............................................................... Displayed in numerals.
Stopwatch...................................................... Hour, minute, second and 1/10 second hands
The stopwatch measures up to 12 hours, 6 minutes
and 12.2 seconds in 1/10 second increments.
6 Additional function ............................................ Energy depletion forewarning function and overcharge
prevention function
7 Duration of charge
Full charge ..................................................... Approximately 1 month (if the stopwatch is used for
less than 3 hours a day)
After the second hand starts moving
at two-second intervals................................ Approximately 12 hours (if the stopwatch is not used)
8 KINETIC electricity storage unit ........................ Button type, 1 piece
9 IC (Integrated Circuit) ........................................ C-MOS-IC, 1 piece
* The specifications are subject to change without prior notice for product improvement.
● While the stopwatch is measuring, pressing button A will not reset the stopwatch.
● Do not press buttons A and B at the same time, nor press one of the two buttons while keeping the other
pressed. Otherwise, a malfunction will result.