Filter
Top Products
• Push button B until the time is on the display.
• Pull crown to position 2.
• Turn the crown in direction X to increment time; turn faster to maker bigger steps.
• Turn the crown in direction Y to decrement time, turn faster to maker bigger
steps,
• Push button B to reset the seconds, if seconds are <29 the seconds go to zero and
the minutes do not change, if the seconds are >29 the seconds go to zero and the
minutes are incremented by one.
• Push crown to position 1 when digital time is correct.
Set day and date.
• Push button B until the day and date are on the display.
• Pull crown to position 2.
• Turn the crown in direction Y to change the day.
• Turn the crown in direction X to change the date, now the month and date are
shown.
• Turn crown in direction X to set the month and date.
• Push crown to position 1 when day and date are correct.
Set local digital time.
• Push button B until the local time is on the display. (-L on display)
• Pull crown to position 2.
• Turn the crown in direction X to increment time, turn faster to maker bigger steps.
• Turn the crown in direction Y to decrement time, turn faster to maker bigger
steps.
• Push crown to position 1 when local time is correct.
Changeover between 12-Hour and 24-Hour indication.
• Push button B until the time is on the display.
• Pull crown to position 2 and after 1 second back to position 1 again. Just repeat
this action to switch over again.
Set alarm time.
• Push button B until the alarm time is on the display. (AL on display)
• Pull crown to position 2.
• Turn the crown in direction X to increment time, turn faster to maker bigger steps.
• Turn the crown in direction Y to decrement time, turn faster to maker bigger
steps.
•
Push crown to position 1 when alarm time is correct.
• When the alarm time is set the alarm function turns on automatically. (See
table below)