Filter
Top Products
Note: Do not set the date between 9:00 p.m. and 1:00 a.m. as the date may not change
properly. If it is necessary to set the date during that time period, first move the
hands so that the time shown is either before or after this period, adjust the date
and then reset the correct time.
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the previous day’s
date appears.
3. Pull out the crown to the second click, and advance
the hour and minute hands until the desired time
and date appear.
4. Push the crown back in to the normal position.
DATE SETTING
a) Normal position
b) First click
TO PRESERVE THE QUALITY OF YOUR WATCH
■ WATER RESISTANCE
• Non-water resistance
If “WATER RESISTANT” is not inscribed on the case back, your
watch is not water resistant, and care should be taken not to get it
wet as water may damage the movement. If the watch becomes
wet, we suggest that you have it checked by an AUTHORIZED SEIKO
DEALER or SERVICE CENTER.
• Water resistance (3 bar)
If “WATER RESISTANT” is inscribed on the case back, your watch
is designed and manufactured to withstand up to 3 bar, such as
accidental contact with splashes of water or rain, but it is not
designed for swimming or diving.
• Water resistance (5 bar)*
If “WATER RESISTANT 5 BAR” is inscribed on the case back, your
watch is designed and manufactured to withstand up to 5 bar and
is suitable for swimming, yachting and taking a shower.
• Water resistance (10 bar/15 bar)*
If “WATER RESISTANT 10 BAR” or “WATER RESISTANT 15 BAR”
is inscribed on the case back, your watch is designed and
manufactured to withstand up to 10 bar/15 bar and is suitable for
taking a bath and shallow diving, but not for scuba diving. We
recommend that you wear a SEIKO Diver’s watch for scuba diving.
Date
Crown
a b