Seiko 6M26 Watch User Manual


 
English
27
Non-water resistant
Water resistant 5/10/15/20 bar
• If the watch becomes wet, have it
checked by an AUTHORIZED
SEIKO DEALER or SERVICE
CENTER.
• Before using in water, be sure the
crown is pushed in completely.
• Do not operate the crown and
buttons when the watch is wet or
in water.
If used in sea water, rinse the
watch in fresh water and dry it
completely.
When taking a shower with a water resistant 5
bar watch, or taking a bath with a water resistant
10, 15 or 20 bar watch, be sure to observe the
following:
* Do not operate the crown or push the buttons
when the watch is wet with soapy water or
shampoo.
* If the watch is left in warm water, a slight
time loss or gain may be caused. This
condition, however, will be corrected when
the watch returns to normal temperature.
* Pressure in bar is a test pressure and
should not be considered as
corresponding to actual diving depth
since swimming movement tends to
increase the pressure at a given
depth. Care should also be taken on
diving into water.
** We recommend that you wear a
SEIKO Diver’s Watch for scuba
diving.
TEMPERATURES
Temperatures over 60°C (140°F) or below
–10°C␣ (+14°F) may cause a slight time loss
or gain or battery leakage or shorten the
battery life.
However, the above conditions will be
corrected when the watch returns to normal
temperature.
5 bar WR
+60°C
-10°C
Your watch works with stable
accuracy within a temperature
range of 5°C and 35°C (41°F
and 95°F).
10/15/20
bar WR