Seiko 5d88 Watch User Manual


 
English
6
English
7
u
Some models may have a crown with a special structure as illustrated
below. Refer to the following instructions when operating this type of
crown, as it should be operated in a different way from that of ordinary
ones.
CROWN WITH DRIVING WHEEL
To pull out the crown, pull out the A portion
(crown).
To turn the crown, turn the
B portion (driving
wheel).
Normal position
First click position
Second click position
Driving wheel
Crown
AB
A
B
HOW TO CHARGE AND START THE WATCH
1. Turn the crown clockwise repeatedly to charge
the watch.
2. After electric power generation by turning the
crown continues for a certain period, the direct
drive indicator hand moves to point at scale
marking 0 and the second hand starts moving.
Make sure to stop turning the crown to check it.
The manual winding mechanism for generating the
electric power functions when the crown is turned
clockwise. The watch can also be charged when the
crown is turned in a reciprocating motion.
When the watch is completely stopped, the direct
drive indicator hand points at scale marking 1 under
the 0 position (standby position).
If the second hand does not move even though the
crown is turned, turn the crown more quickly.
If the watch has been left untouched for several years,
the second hand starts moving in 2-second intervals
after the crown is turned. This is not a malfunction.
Charge the watch by turning the crown until the direct
drive indicator hand moves from the standby position to
the 0 position. It may take approximately 5 to 6 minutes.