Filter
Top Products
19
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
2. Select an onboard workout.
To select an onboard workout, press either the
Calorie button or the Distance button repeatedly.
When you select an onboard workout, the display
will show the duration, the distance, the name, the
maximum speed setting, and the maximum incline
settingoftheworkout.Inaddition,aproleofthe
speed settings of the workout will appear in the ma-
trix. If you select a calorie workout, the approximate
number of calories you will burn will appear in the
name of the workout.
3. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
rstspeedandinclinesettingsoftheworkout.Hold
the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting
and/or incline setting may be programmed for con-
secutive segments.
During the
workout, the
proleson
the speed
and incline
tabs will
show your
progress.
Theashingsegmentoftheprolerepresentsthe
current segment of the workout. The height of the
ashingsegmentindicatesthespeedorincline
setting for the current segment. At the end of each
segment, a series of tones will sound and the next
segmentoftheprolewillbegintoash.Ifadiffer-
ent speed and/or incline setting is programmed for
the next segment, the treadmill will automatically
adjust to the new speed and/or incline setting.
The workout will continue in this way until the last
segmentoftheproleashesinthedisplayandthe
last segment ends. The walking belt will then slow
to a stop.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories that
you burn will depend on your metabolic rate. In
addition, if you manually change the speed or
incline of the treadmill during the workout, the
number of calories you burn will be affected.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button.Thetimewillbegintoashinthedisplay.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4. Follow your progress with the displays.
See step 5 on page 17. The display will show
the time remaining in the workout instead of the
elapsed time.
5. Measure your heart rate if desired.
See step 6 on page 18.
6. When you are nished exercising, remove the
key from the console.
See step 7 on page 18.
Current Segment