Filter
Top Products
MONITOR USAGE
POWER ON: Auto ON when pedal movement or push the BUTTON.
POWER OFF: Automatic shut off after 4 minutes of inactivity.
FUNCTION:
SCAN:
TIME:
SPEED
DISTANCE:
CALORIES:
f
Monitor will rotate through all 4 functions - Time, Speed,
Distance and Calorie every 30 seconds automatically.
Each display will be held for 6 seconds.
Press the button until the pointer advance to TIME and
blinking. Press the button once, the pointer should stop
blinking and fix on the TIME function
Press the button until the pointer advance to SPEED and _.
blinking. Press the button once, the pointer should
Stop blinking and fix on the SPEED function.
Press the button until the pointer advance to DISTANCE and blinking.
button once to fix on the DISTANCE function and stop blinking.
J
Then press the
Press the button until pointer advance to CALORIES and blinking. Press the button once
for stop blinking and fix on the CALORIES function.
SPECIFICATIONS:
FUNCTION
CONTROLLER
SENSOR
BATTERY TYPE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
SCAN
Time
Speed
Distance
Calorie
4 bit signal chip microprocessor
No-contact magnetic type
Two "AA" OR "UM-3"
0oc _4OoC(32°F - 104°F)
.1OoC_60oc (140F - 140OF)
Every 6 seconds
OO:OO- 99:59 min.
0 - 99.9 MPH
0 - 99.9 Mile
0 - 999.9 K. cal
HOW TO REMOVE BATTERY:
1. Pull off the battery cover and place two "AA" or "UM-3" batteries into battery housing on back of
monitor.
2. Insure batteries are correctly positioned and battery springs are in proper contact with batteries.
3. Replace battery cover and insure it is tightly closed.
4. Battery life is approx. 1 year under normal usage.
5. If the display is illegible or only partial segments appear, remove batteries and wait 15 sec_ before
reinstalling.
6. Removing the batteries will erase computer memory.
o