Filter
Top Products
LevelingLeveling
Leveling
YY
Y
ourour
our
BikeBike
Bike
The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level and stable before you exercise.
MovingMoving
Moving
YY
Y
ourour
our
BikeBike
Bike
UprightUpright
Upright
To move the upright bike, carefully pull the Handlebars toward you while pushing
the front of the bike downward. Push the bike to the desired location.
RecumbentRecumbent
Recumbent
To move the recumbent bike, carefully lift the rear end of the bike and
slowly push the bike to the desired location.
NOTICE: Be careful when you move the bike. All abrupt motions can affect the computer operation.
TT
T
roubleshootingroubleshooting
roubleshooting
ProblemProblem
Problem
CheckCheck
Check
SolutionSolution
Solution
If bike has AC adapter, check electrical (wall) outlet
Make sure unit is plugged into a functioning wall
outlet.
If bike has AC adapter, check connection at unit Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
If bikehas batteries, checkBattery Indicator onconsole
or check batteries.
Replace the batteries. It may be necessary to replace
the batteries although the Battery Indicator is not on.
Check data cable integrity
All wires in cable should be intact. If any are visibly
crimped or cut, replace cable.
Check data cable connections/orientation
Make sure cable is connected securely and oriented
properly. Small latch on connector should line up and
snap into place.
Check console display for damage Check for visual sign that console display is cracked or
otherwise damaged. Replace Console if damaged.
No display/partial display/unit will not turn on
1313
13