Schwinn 213 Exercise Bike User Manual


 
OPERATION
2 Custom User-defined Programs
These programs enable you to set up, store into memory and then workout
in 2 different course profiles that you customize.
Time Trial
This program enables you to workout against a “pacer” to determine how
long it takes you to cover a preset distance. You preset the speed of the
“pacer” as the baseline of your workout and race to the end of the preset
distance. At the end of the Time Trial the computer displays the watts,
distance, speed, etc. that you have achieved.
Fitness T
est
The Fitness Test is one of the best ways to measure improvements in your
physical fitness level. The test measures your fitness by comparing your
power output (in Watts) to your Heart Rate. In general, as you become
“more fit,” you will produce more power (Watts) at a given Heart Rate.
As the test starts, the power (Watts) slowly increases. This means that you
will work harder, and as a result, your heart rate increases. The Watts
continue to increase automatically until your heart rate reaches the “Test
Zone.” This zone is individually computed to be near 75% of your maxi-
mum Heart Rate. When you reach the “Test Zone” the bike holds the
Watts steady for three minutes. This is to allow you to reach a steady state
(where your Heart Rate has become basically steady).
At the end of the three minutes, the computer measures your Heart Rate,
and the power (Watts.) These numbers, (along with information about your
age and weight,) are put into a formula and produce a “Fitness Score.”
Note: The Fitness Test is an excellent way to measure changes in your own
fitness level. It is not designed to be used to compare one person’s score
to another person’s score. This is because the test protocol only “estimates”
your “Maximum Heart Rate.”
Calorie Goal:
The Calorie Goal feature lets you select an amount of Calories you would
like to burn during your workout.
When selecting “CALORIE GOAL”, use the UP and DOWN buttons to
select the amount of Calories you wish to “burn” from 10 to 990. Each
increment will change the Calories by 10. Confirm your selected value by
pressing the ENTER button.
The console will prompt you to choose a profile program. Use the UP or
DOWN buttons to select a profile program and press the ENTER button to
confirm your selection. During the program the Calorie display will count
down from the number of Calories you entered to 0.
16
Nautilus OM 113/213 08/18/2004 12:00 AM Page 15