Filter
Top Products
Instructions
IMPORTANT!: To ensure ease of assembly please verify the size and
quantity of all the required assembly hardware and parts with the enclosed
parts list and full size hardware chart.
Each step of the assembly process has been broken down into 6 easy-to-follow
stages. Please take just a few moments to read over these instructions to
familiarize yourself with the process to make assembly quick and trouble-free.
Assembly Stage #1
Assemble Seat and Handle Bar
Assembly hardware required: (8) M8 Allen Bolts 45 mm long (item #25)
(4) M8 Allen Bolts 16 mm long (item #5)
(12) Flat Washer Ø8* Ø 16*2T(item #15)
(8) Screws M4x14L (item #29)
Step 1: Attach HANDLEBAR ASSEMBLY (#20) to SEAT FRAME (#26) with the 4
ALLEN BOLTS 16mm (#5) and 4 FLAT WASHERS (#15). Tighten bolts with the
provided Allen wrench.
Step 2: Attach the right and left WATER BOTTLE HOLDERS (#28) with the
SCREWS (#29) to the underside of the SEAT BOTTOM (#23) using the provided
screwdriver.