Schwinn 001-7214-010808A Exercise Bike User Manual


  Open as PDF
of 20
 
Assembly Steps
7-1: Feed Lower Pulse Wire (22) and Lower Computer
Wire (24) through the Front Post (31).
7-2: Install the Front Post (31) onto the Main Frame (1),
using 4 Hex Screws (16) and 4 Arc Washers (32).
7-3: Connect Lower Pulse Wire (22) to the Pulse Wire
Connector (9), and the Lower Computer Wire (24) to
the Computer Wire Connector (27).
Note: Push the wires gently into the Front Post.
Do not cut or pinch the wires.
7-4: Install the Console (10) to Front Post (31) using 4
Flat Head Phillips Screws (28) as shown in Figure
7A.
Parts:
•#22-LowerPulseWire(Qty1)
•#24-LowerComputerWire(Qty1)
•#31-FrontPost(Qty1)
•#10-Console(Qty1)
•#9-PulseWireConnector(Qty1)
•#27-ComputerWireConnector(Qty1)
•#32-ArcWasher(Qty4)
•#16-HexScrew(Qty4)
•#28-FlatHeadPhillipsScrew(Qty4)
Tools:
•HexkeyL6
Step 7: Mount the Console
Figure
7
A
24
1
27
10
22
Figure 7
9
32
16
28
10
24
28
31
27
22
9
Assembly Manual
14
TOC
 previous next