Filter
Top Products
6
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Assembly requires only the included tools.
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
ASSEMBLY
M
ake Assembly Easier
E
verything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
1.
Orient the Front Leg (2) as shown. Attach the
Front Leg to the Frame (1) with two M8 x 63mm
Bolts (16), two M8 Washers (20), and two M8
Nylon Locknuts (24). Do not tighten the Nylon
Locknuts yet.
Before beginning assembly, make sure
that you have read and understand the
information in the box above.
1
1
16
20
24
Holes
2