Filter
Top Products
23
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The SPEED/PACE display will
show an “E” (for English miles)
or an “M” (for metric kilome-
ters). The unit of measurement
can be changed by pressing
the SPEED + button.
The DISTANCE/LAPS display
will show the total number of
miles that the walking belt has
moved.
The TIME display will show the
total number of hours that the
treadmill has been used.
IMPORTANT: Make sure that
there is not a letter “d” in the
CALS/FAT CALS display. If a
“d” appears in the display, the
console is in the “demo” mode.
This mode is intended to be used only when a treadmill
is displayed in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can be
removed from the console, and the displays and indica-
tors on the console will automatically light in a preset
sequence, although the buttons on the console will not
operate. If a “d” appears in the CALS/FAT CALS dis-
play when the information mode is selected, press
the SPEED – button so the display is blank.
To exit the information mode, remove the key from the
console.
By adding the optional
iFIT.com module to the
treadmill, you can use vir-
tually endless features
from our internet site.
Imagine on-line competi-
tions, personal training
sessions via the internet,
and enabling your computer to track your workouts. For
information about purchasing the optional iFIT.com
module, call toll-free 1-800-884-0620.
THE INFORMATION MODE/DEMO MODE THE OPTIONAL IFIT.COM MODULE